Square D Telemecanique Cross Reference Guide for Limit Switches
We ship these products worldwide! Delivery is normally stock.
Request a Quote now or call us at 1-800-755-2883 for expert assistance.
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| 1745 (C to M reducer) | None | |
| 5387-1 | None | Paddle assembly for paddle switches |
| 5387-9 | KC | |
| 5,685 | CT54 | |
| 5,686 | CT62 | |
| 5,690 | CO54 | |
| 5690-1 | CO54 | |
| 5690-2 | 31032-450-03 | |
| 5690-3 | CO54 Form P5 | All pilot lights are prewired |
| 5690-4 | CO54 Form Y140 | |
| 5690-5 | CO54 Form Y78 | Check possible use of reed contacts |
| 5,691 | CO68 | For neutral position applications |
| CO66 | For two-stage applications | |
| 5691-1 | CO68 | For neutral position applications |
| CO66 | For two-stage applications | |
| 5691-2 | CO68 Form P8 | 2 pilot lights, all pilot lights are prewired |
| 5691-3 | CO68 Form Y140 | For neutral position applications |
| CO66 Form Y140 | For two-stage applications | |
| 5,692 | CO62 | |
| 5692-1 | CO62 | |
| 5692-2 | CO62 Form P8 | 2 pilot lights, all pilot lights are prewired |
| 5692-3 | CO62 Form Y140 | |
| 5810-1 | CO54 and CT54 | |
| 5810-15 | B54NC2? |
Order complete switch assembly |
| 5810-2 | CO54 Form Y78 & CT54 | Check possible use of a reed switch |
| 5810-3 | CO54 Form P5 & CT54 | All pilot lights are prewired |
| 5810-4 | CO54 & CT54 Form Y2051 | |
| 5810-5 | CO54 & CT54 Form Y2051 | 1/2 inch conduit |
| 5810-6 | CO54 and CT54 | |
| 5,812 | CO62 & CT62 | |
| 5812-1 | CO62 & CT62 Form Y2051 | |
| 5812-10 | CO68 & CT62 Form Y2051 | For neutral position applications |
| CO66 & CT62 Form Y2051 | For two-stage applications | |
| 5812-11 | CO68 & CT62 | For neutral position applications |
| CO66 & CT62 | For two-stage applications | |
| 5812-2 | CO62 & CT62 | |
| 5812-5 | CO62 Form Y78 & CT62 | Check possible use of reed contacts |
| 5812-9 | CO68 & CT62 | For neutral position applications |
| CO66 & CT62 | For two-stage applications | |
| 5,902 | BT1 | |
| 5902B | BT1 | |
| 6252-1 | CO68 Form Y78 | For neutral position applications, switch module only is not available |
| CO66 Form Y78 | For two-stage applications, switch module only is not available | |
| 6252-2 | CO68 | For neutral position applications, switch module only is not available |
| CO66 | For two-stage applications, switch module only is not available | |
| 6252-6 | CO68 | For neutral position applications, switch module only is not available |
| CO66 | For two-stage applications, switch module only is not available | |
| 6261-3 | CO54 | Switch module only is not available |
| 6,378 | CO54 | Switch module only is not available |
| 6,379 | CO62 | Switch module only is not available |
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| 7A1 | MA11 | |
| 7A10 | HA1 | Adjustable length arm, 5/8″ dia. roller |
| 7A102N | HA20 | Adjustable length arm, bendable, 1-5/8″ dia. roller |
| 7A10N | HA4 | Adjustable length arm, 5/8″ dia. roller |
| 7A11 | MA4 | Nylon roller |
| 7A11N | MA4 | |
| 7A1N | MA18 | |
| 7A1NS | MA18 | Not corrosion proof |
| 7A1R | MA9 | 11/16″ dia. roller |
| 7A2 | AA1 | 5/8″ dia. roller |
| 7A2N | AA8 | 5/8″ dia. roller |
| 7A3 | BA11 | |
| 7A31 | BA4 | Nylon roller |
| 7A31N | BA4 | |
| 7A34N | BA4 | 1″ dia. roller |
| 7A3N | BA18 | |
| 7A3R | BA9 | 11/16″ dia. roller |
| 7A4 | CA11 | |
| 7A41 | CA4 | Nylon roller |
| 7A41N | CA4 | |
| 7A42N | CA4 | 1″ dia. roller |
| 7A44N | CA4 | 1″ dia. roller |
| 7A4N | CA18 | |
| 7A4R | CA9 | 11/16″ dia. roller |
| 7A5 | DA11 | |
| 7A51 | DA4 | Nylon roller |
| 7A51N | DA4 | |
| 7A5N | BA18 | |
| 7A5R | DA9 | 11/16″ dia. roller |
| 7A6 | EA11 | |
| 7A61 | EA4 | Nylon roller |
| 7A61N | EA4 | |
| 7A6N | EA18 | |
| 7A6R | EA9 | 11/16″ dia. roller |
| 7A7 | CA11 | 2″ long arm |
| 7A71 | CA4 | Nylon roller |
| 7A71N | CA4 | |
| 7A7N | CA18 | 2″ long arm |
| 7A7R | CA9 | 2″ long arm, 11/16″ dia. roller |
| 7A8N | None | Telemecanique arm is 5″ long, 9007 C has a max. length of 4″ |
| 7A91N | None | Telemecanique arm is 6″ long, 9007 C has a max. length of 4″ |
| 7A9N | None | Telemecanique arm is 6″ long, 9007 C has a max. length of 4″ |
| 7B1 | MA12 | 5/8″ wide roller |
| 7B10N | HA4 | Adjustable length arm, roller is 5/8″ dia. x 1/4″ wide |
| 7B11 | MA7 | 5/8″ wide roller |
| 7B11N | MA13 | 5/8″ wide roller |
| 7B1N | MA17 | 5/8″ dia. x 5/8″ wide roller |
| 7B2 | AA2 | 5/8″ dia. x 5/8″ wide roller |
| 7B2N | AA17 | 5/8″ dia. x 5/8″ wide roller |
| 7B3 | BA12 | 5/8″ wide roller |
| 7B31 | BA7 | 5/8″ wide roller |
| 7B31N | BA13 | 5/8″ wide roller |
| 7B3N | BA17 | 5/8″ dia. x 5/8″ wide roller |
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| 7B4 | CA12 | 5/8″ wide roller |
| 7B41 | CA7 | 5/8″ wide roller |
| 7B41N | CA13 | 5/8″ wide roller |
| 7B44N | CA13 | 1″ dia. x 5/8″ wide roller |
| 7B4N | CA17 | 5/8″ dia. x 5/8″ wide roller |
| 7B5 | DA12 | 5/8″ wide roller |
| 7B51 | DA7 | 5/8″ wide roller |
| 7B51N | DA13 | 5/8″ wide roller |
| 7B5N | DA17 | 5/8″ dia. x 5/8″ wide roller |
| 7B6 | EA12 | 5/8″ wide roller |
| 7B61 | EA7 | 5/8″ wide roller |
| 7B61N | EA13 | 5/8″ wide roller |
| 7B6N | EA17 | 5/8″ dia. x 5/8″ wide roller |
| 7B7 | CA12 | 2″ long arm, 5/8″ wide roller |
| 7B71 | CA7 | 2″ long arm, 5/8″ wide roller |
| 7B71N | CA13 | 2″ long arm, 5/8″ wide roller |
| 7B7N | CA17 | 2″ long arm, 5/8″ dia. x 5/8″ wide roller |
| 7B8N | None | Telemecanique arm is 5″ long, 9007 C has a max. length of 4″ |
| 7B9N | None | Telemecanique arm is 6″ long, 9007 C has a max. length of 4″ |
| 7C1 | MA3 | |
| 7C1N | MA3 | |
| 7C3 | BA3 | |
| 7C3N | BA3 | |
| 7C4 | CA3 | |
| 7C4N | CA3 | |
| 7C5 | DA3 | |
| 7C5N | DA3 | |
| 7C6 | EA3 | |
| 7C6N | EA3 | |
| 7D | HA5 | |
| 7 | None | Hub included with lever arms |
| 70 | HA3 | 5/8″ wide roller |
| 7D1N | HA23 | 5/8″ wide roller |
| 700 | HA20 | 5/8″ wide nylon roller |
| 7D2N | HA20 | 5/8″ wide roller |
| 70,000 | HA20 | 5/8″ wide nylon roller |
| 7D4N | HA20 | 5/8″ wide roller |
| 7DB | HA6 | 5/8″ dia. x 5/8″ wide roller |
| 7DB1 | HA23 | 5/8″ wide nylon roller |
| 7DB1N | HA23 | 5/8″ wide roller |
| 7DBN | HA8 | 5/8″ dia. x 1/4″ wide roller |
| 7DF | HA6 | 5/8″ dia. x 5/8″ wide roller |
| 7DF1 | HA7 | 1″ dia. x 5/8″ wide roller |
| 7DF1N | HA23 | 1″ dia. x 5/8″ wide roller |
| 7DFN | HA23 | 1″ dia. x 5/8″ wide roller |
| 7DJ | HA6 | 5/8″ dia. x 5/8″ wide roller |
| 7DJN | HA23 | 1″ dia. x 5/8″ wide roller |
| 7DN | HA8 | 5/8″ wide roller |
| 7DR | HA25 | 11/16″ dia. roller |
| 7E | FA1 | 10″ long rod (includes hub) |
| 7F10N | HA2 | Adjustable length arm, roller is 5/8″ dia. x 5/8″ wide |
| 7F11N | MA13 | |
| 7F1N | MA17 |
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| 7F2N | AA17 | 5/8″ dia. x 5/8″ wide roller |
| 7F31N | BA13 | |
| 7F3N | BA17 | |
| 7F41N | CA13 | |
| 7F4N | CA17 | |
| 7F51N | DA13 | |
| 7F5N | DA17 | |
| 7F61N | EA13 | |
| 7F6N | EA17 | |
| 7F71N | CA13 | 2″ long arm |
| 7F7N | CA17 | 2″ long arm |
| 7F8N | None | Telemecanique arm is 5″ long, 9007 C has a max. length of 4″ |
| 7F9N | None | Telemecanique arm is 6″ long, 9007 C has a max. length of 4″ |
| 7HS-24 | FA11 | |
| 7J10N | HA2 | Adjustable length arm, roller is 5/8″ dia. x 5/8″ wide |
| 7J11N | MA21 | 3/4″ dia. roller |
| 7J1N | MA21 | |
| 7J2N | AA21 | |
| 7J31N | BA21 | 3/4″ dia. roller |
| 7J3N | BA21 | |
| 7J41N | CA21 | 3/4″ dia. roller |
| 7J4N | CA21 | |
| 7J51N | DA21 | 3/4″ dia. roller |
| 7J5N | DA21 | |
| 7J61N | EA21 | 3/4″ dia. roller |
| 7J64N | EA21 | |
| 7J6N | EA21 | |
| 7J71N | CA21 | 2″ long arm, 3/4″ dia. roller |
| 7J7N | CA21 | 2″ long arm |
| 7J8N | None | Telemecanique arm is 5″ long, 9007 C has a max. length of 4″ |
| 7J9N | None | Telemecanique arm is 6″ long, 9007 C has a max. length of 4″ |
| 7K1 | RA11 | |
| 7K1N | RA18 | |
| 7K3 | RA11 | 1 1/2″ long arm |
| 7K3N | RA18 | 1 1/2″ long arm |
| 7K4N | RA18 | 1 1/2″ long arm |
| 7K5N | RA18 | 1 1/2″ long arm |
| 7N | FA5 | 12″ long rod, with spring (includes hub) |
| 7N12 | FA5 | Delrin spring rod |
| 7N24 | FA11 | Delrin spring rod |
| 7NS | FA5 | Delrin spring rod, not corrosion proof |
| 7S | FA5 | |
| 7S-12 | FA5 | |
| 7S12 | FA5 | |
| 7SS | FA5 | Not corrosion proof |
| 7XA1 | MA11 | |
| 7XA10N | HA4 | Adjustable length arm, 5/8″ dia. roller |
| 7XA10R | HA24 | Adjustable length arm, 11/16″ dia. roller |
| 7XA11 | MA4 | Nylon roller |
| 7XA11N | MA4 | |
| 7XA1N | MA18 | |
| 7XA1R | MA9 | 11/16″ dia. roller |
| 7XA2 | AA1 | 5/8″ dia. roller |
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| 7XA2N | AA8 | 5/8″ dia. roller |
| 7XA3 | BA11 | |
| 7XA31 | BA4 | Nylon roller |
| 7XA31N | BA4 | |
| 7XA3N | BA18 | |
| 7XA3R | BA9 | 11/16″ dia. roller |
| 7XA4 | CA11 | |
| 7XA41 | CA4 | Nylon roller |
| 7XA41N | CA4 | |
| 7XA4N | CA18 | |
| 7XA4R | CA9 | 11/16″ dia. roller |
| 7XA5 | DA11 | |
| 7XA51 | DA4 | Nylon roller |
| 7XA51N | DA4 | |
| 7XA5N | DA18 | |
| 7XA5R | DA9 | 11/16″ dia. roller |
| 7XA6 | EA11 | |
| 7XA61 | EA4 | Nylon roller |
| 7XA61N | EA4 | |
| 7XA62N | EA4 | 1″ dia. roller |
| 7XA6N | EA18 | |
| 7XA6R | EA9 | 11/16″ dia. roller |
| 7XA7 | CA11 | 2″ long arm |
| 7XA71 | CA4 | 2″ long arm, nylon roller |
| 7XA71N | CA4 | 2″ long arm, nylon roller |
| 7XA7N | CA18 | 2″ long arm |
| 7XA7R | CA9 | 2″ long arm |
| 7XA8N | None | Telemecanique arm is 5″ long, 9007 C has a max. length of 4″ |
| 7XA9N | None | Telemecanique arm is 6″ long, 9007 C has a max. length of 4″ |
| 7XB1 | MA12 | 5/8″ wide roller |
| 7XB10N | HA4 | Adjustable length arm, roller is 5/8″ dia. x 1/4″ wide. |
| 7XB11 | MA7 | 5/8″ wide roller |
| 7XB11N | MA13 | 5/8″ wide roller |
| 7XB1N | MA17 | 5/8″ dia. x 5/8″ wide roller |
| 7XB2 | AA2 | 5/8″ dia., 5/8″ wide roller |
| 7XB2N | AA17 | 5/8″ dia., 5/8″ wide roller |
| 7XB3 | BA12 | 5/8″ wide roller |
| 7XB31 | BA7 | 5/8″ wide roller |
| 7XB31N | BA13 | 5/8″ wide roller |
| 7XB3N | BA17 | 5/8″ dia. x 5/8″ wide roller |
| 7XB4 | CA12 | 5/8″ wide roller |
| 7XB41 | CA7 | 5/8″ wide roller |
| 7XB41N | CA13 | 5/8″ wide roller |
| 7XB44N | CA13 | 1″ dia. x 5/8″ wide roller |
| 7XB4N | CA17 | 5/8″ dia. x 5/8″ wide roller |
| 7XB5 | DA12 | 5/8″ wide roller |
| 7XB51 | DA7 | 5/8″ wide roller |
| 7XB51N | DA13 | 5/8″ wide roller |
| 7XB51N | DA13 | 5/8″ wide roller |
| 7XB5N | DA17 | 5/8″ dia. x 5/8″ wide roller |
| 7XB6 | EA12 | 5/8″ wide roller |
| 7XB61 | EA7 | 5/8″ wide roller |
| 7XB61N | EA13 | 5/8″ wide roller |
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| 7XB6N | EA17 | 5/8″ dia. x 5/8″ wide roller |
| 7XB7 | CA12 | 2″ long arm, 5/8″ wide roller |
| 7XB71 | CA7 | 2″ long arm, 5/8″ wide roller |
| 7XB71N | CA13 | 2″ long arm, 5/8″ wide roller |
| 7XB7N | CA17 | 2″ long arm, 5/8″ dia. x 5/8″ wide roller |
| 7XB8N | None | Telemecanique arm is 5″ long, 9007 C has a max. length of 4″ |
| 7XB9N | None | Telemecanique arm is 6″ long, 9007 C has a max. length of 4″ |
| 7XF10N | HA2 | Adjustable length arm, roller is 5/8″ dia. x 5/8″ wide |
| 7XF11N | MA13 | |
| 7XF1N | MA17 | |
| 7XF2N | AA17 | 5/8″ dia. x 5/8″ wide roller |
| 7XF31N | BA13 | |
| 7XF34N | BA13 | 1″ dia. roller |
| 7XF3N | BA17 | |
| 7XF41N | CA13 | |
| 7XF4N | CA17 | |
| 7XF51N | DA13 | |
| 7XF5N | DA17 | |
| 7XF61N | EA13 | |
| 7XF6N | EA17 | |
| 7XF71N | CA13 | 2″ long arm |
| 7XF7N | CA17 | 2″ long arm |
| 7XF8N | None | Telemecanique arm is 5″ long, 9007 C has a max. length of 4″ |
| 7XF9N | None | Telemecanique arm is 6″ long, 9007 C has a max. length of 4″ |
| 7XJ10N | HA2 | Adjustable length arm, roller is 5/8″ dia. x 5/8″ wide |
| 7XJ11N | MA21 | 3/4″ dia. roller |
| 7XJ1N | MA21 | |
| 7XJ2N | AA21 | |
| 7XJ31N | BA21 | 3/4″ dia. roller |
| 7XJ3N | BA21 | |
| 7XJ41N | CA21 | 3/4″ dia. roller |
| 7XJ4N | CA21 | |
| 7XJ4NS | CA21 | Not corrosion proof |
| 7XJ51N | DA21 | 3/4″ dia. roller |
| 7XJ5N | DA21 | |
| 7XJ61N | EA21 | 3/4″ dia. roller |
| 7XJ6N | EA21 | |
| 7XJ71N | CA21 | 2″ long arm, 3/4″ dia. roller |
| 7XJ7N | CA21 | Telemecanique arm is 1-3/4″ long |
| 7XJ8N | None | Telemecanique arm is 5″ long, 9007 C has a max. length of 4″ |
| 7XJ9N | None | Telemecanique arm is 6″ long, 9007 C has a max. length of 4″ |
| A1613 | KA12 | |
| A1613N | KA21 | 1″ wide roller |
| A1614 | KA11 | |
| A1614N | KA18 | |
| A1624 | KA24 | Nylon roller |
| A1624N | KA21 | |
| A1692 | FA1 | 1/8″ dia. rod (includes hub) |
| A1697 | KB11 | 7/8″ offset, 1-1/2″ long arm |
| A1766 | None as of Dec. 1994 | Turnstile arm |
| A1766-1 | None as of Dec. 1994 | Turnstile arm |
| A1766-2 | None as of Dec. 1994 | Turnstile arm |
| A1770 | R22 and S9 hub | 3-3/4″ long roller |
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| A1774 | FA1 | 1/8″ dia. rod (includes hub) |
| A1782 | FA6 | |
| A1793 | LA4 | |
| A1793A | LA5 | |
| A1793B | LA6 | |
| A1811 | BAO | |
| A1812 | R22 and S9 hub | 7/8″ dia. x 3 3/4″ long roller |
| A1812-1 | R22 and S9 hub | 7/8″ dia. x 3 3/4″ long roller |
| A5189 | FA1 | |
| AIR | None | Air operated switch is not available |
| C2AGJK01 | C54B2 Form Y78 | 1/2″ conduit, check possible use of reed contacts |
| C2AGW | C54K Form Y78 | 1/2″ conduit, check possible use of reed contacts |
| C2AIR | None | Air operated switch is not available |
| C2AJK01-561 | C54B2 Form Y78 Y1851? |
Check possible use of reed contacts |
| C2AJK05 | C54B Form Y78 | Check possible use of reed contacts |
| C2AJK1 | C54E Form Y78 | Check possible use of reed contacts |
| C2AJK2 | C54D Form Y78 | Check possible use of reed contacts |
| C2AJK3 | C54G Form Y78 | Check possible use of reed contacts |
| C2AVJK05V | C54B Form Y78 Y140 | Check possible use of reed contacts |
| C2BAIR | None | Air operated switch is not available |
| C2BATJK2T | C54D Form Y78 | Check possible use of reed contacts, low temperature not available in plunger types |
| C2BCNW | C54L | Nylon coated steel wire |
| C2BCW | C54L | |
| C2BCWB | C54L | Nylon coated steel wire with plain end |
| C2BFAIR | None | Air operated switch is not available |
| C2BFJK542 | B54NC2? |
|
| C2BFL37AIR | None | Air operated switch is not available |
| C2BFLJK542 | B54NC2 Form P5? |
|
| C2BHJK09 | C54C | Standard differential |
| C2BHJK09-561 | C54C Form Y1851? |
Standard differential |
| C2BHJK528 | None as of Dec. 1994 | Turnstile switch |
| C2BHTJK09T | C54C Form Y128 | Standard differential |
| C2BJD01 | C54B2 | |
| C2BJD012 | C54N2 | |
| C2BJD013 | C54A2 | |
| C2BJD05 | C54B | |
| C2BJD052 | C54N | |
| C2BJD053 | C54A | |
| C2BJD09 | C54C | |
| C2BJD1 | C54E | |
| C2BJD2 | C54D | |
| C2BJD3 | C54G | |
| C2BJD4 | C54FH | |
| C2BJD5 | C54F | |
| C2BJK01 | C54B2 | |
| C2BJK01-546 | C54B2 Form Y1901? |
5-pin Mini connector instead of 4-pin Mini connector |
| C2BJK01-561-18 | C54B2 Form Y185118? |
|
| C2BJK012 | C54N2 | |
| C2BJK013 | C54A2 | |
| C2BJK013-561 | C54A2 Form Y1851? |
|
| C2BJK013-561-18 | C54A2 Form Y185118? |
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| C2BJK015 | C54B2 | |
| C2BJK05 | C54B | |
| C2BJK05-519-5902B | C54B Form Y147 Y1901? |
5-pin Mini connector instead of 4-pin connector (Telemecanique connector was much larger) |
| C2BJK05-561 | C54B Form Y1851? |
|
| C2BJK05-561-12 | C54B Form Y185112? |
|
| C2BJK052 | C54N | |
| C2BJK052-561 | C54N Form Y1851? |
|
| C2BJK053 | C54A | |
| C2BJK054 | C54A | Standard operating force/torque |
| C2BJK05P | C54B Form Y1841? |
5’ wires |
| C2BJK05W | C54B1 | |
| C2BJK05WY | C54B1 Form Y203 | |
| C2BJK09 | C54C | |
| C2BJK1 | C54E | |
| C2BJK2 | C54D | |
| C2BJK2-561 | C54D Form Y1851? |
|
| C2BJK2N | C54D | Steel roller |
| C2BJK2X | C54D Form Y201 | |
| C2BJK3 | C54G | |
| C2BJK3-561 | C54G Form Y1851? |
|
| C2BJK4 | C54FH | |
| C2BJK4-546 | C54FH Form Y1901? |
5-pin Mini connector instead of 4-pin Mini connector |
| C2BJK5 | C54F | |
| C2BJK528 | None as of Dec. 1994 | Turnstile switch |
| C2BJKF05 | C54B | |
| C2BJKF05-561 | C54B Form Y1851? |
|
| C2BLAIR | None | Air operated switch is not available |
| C2BLJK01 | C54B2 Form P5 | |
| C2BLJK01-521-6 | C54B2 Form P5 Y1851? |
8’ cable |
| C2BLJK012 | C54N2 Form P5 | |
| C2BLJK013 | C54A2 Form P5 | |
| C2BLJK05 | C54B Form P5 | |
| C2BLJK052 | C54N Form P5 | |
| C2BLJK053 | C54A Form P5 | |
| C2BLJK2 | C54D Form P5 | |
| C2BLJK5 | C54F Form P5 | |
| C2BNW | C54J | |
| C2BRJK01 | C54B2 Form Y231 | |
| C2BRJK052 | C54N Form Y231 | |
| C2BRTJK05T | C54B Form Y128 Y231 | |
| C2BTJK01T | C54B2 Form Y128 | |
| C2BTJK01T-520 | C54B2 Form Y128 Y1851? |
8’ cable |
| C2BTJK05T | C54B Form Y128 | |
| C2BTJK05TW | C54B1 Form Y128 | |
| C2BTJK2T | C54D | Low temperature is not available on plunger types |
| C2BTJK4T | C54FH | Low temperature is not available on plunger types |
| C2BTJK5T | C54F | Low temperature is not available on plunger types |
| C2BVJK01V | C54B2 Form Y140 | |
| C2BVJK01V-547 | C54B2 Form Y140 Y1901? |
|
| C2BW | C54L | |
| C2BW-551-12 | C54L Form Y1851? |
8’ cable |
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| C2BX0001 | C54L | Includes receptacle |
| C2CNW | C54L | Nylon coated steel wire |
| C2CW | C54L | |
| C2CW-12 | C54L S1 | |
| C2CWB | C54L | Nylon coated steel wire with plain end |
| C2CWB6 | C54L | Nylon coated steel wire with plain end |
| C2FJK05-561 | C54B Form Y1851? |
Standard operating force/torque |
| C2FJK1 | C54E | Standard operating force |
| C2FJK542 | B54NC2? |
|
| C2FJK542-520 | B54NC2? |
Type not available prewired and potted |
| C2FLJK542 | B54NC2? |
No pilot light |
| C2GJK05 | C54B | 1/2 inch conduit |
| C2HJK09 | C54C | Standard differential |
| C2HJK09-520-6 | C54C Form Y1851? |
Standard differential |
| C2HJK09Y | C54C Form Y203 | Standard differential |
| C2HJK528 | None as of Dec. 1994 | Turnstile switch |
| C2HMJK09 | C54C Form Y2051 | Standard differential |
| C2HTJK09T | C54C Form Y128 | Standard differential |
| C2JD01 | C54B2 | |
| C2JD012 | C54N2 | |
| C2JD013 | C54A2 | |
| C2JD05 | C54B | |
| C2JD053 | C54A | |
| C2JD09 | C54C | |
| C2JD1 | C54E | |
| C2JD2 | C54D | |
| C2JD3 | C54G | |
| C2JD4 | C54FH | |
| C2JD5 | C54F | |
| C2JDO52 | C54N | |
| C2JK01 | C54B2 | |
| C2JK01-P | C54B2 Form Y1841? |
5’ wires |
| C2JK012 | C54N2 | |
| C2JK013 | C54A2 | |
| C2JK014 | C54B2 | Standard operating force/torque |
| C2JK015 | C54B2 | |
| C2JK01X | C54B2 Form Y201 | |
| C2JK01Z | C54B2 Form Y202 | |
| C2JK05 | C54B | |
| C2JK05-520 | C54B Form Y1851? |
8’ cable |
| C2JK05-520-12 | C54B Form Y185112? |
|
| C2JK05-520-18 | C54B Form Y185118? |
|
| C2JK05-520E-12 | C54B Form Y185112? |
|
| C2JK05-520E-18 | C54B Form Y185118? |
|
| C2JK05-521E-18 | C54B Form Y185118? |
|
| C2JK05-546 | C54B Form Y1901? |
5-pin Mini connector instead of 4-pin Mini connector |
| C2JK05-547E | C54B Form Y1902? |
|
| C2JK05-553-E | C54B Form Y1902? |
5-pin Mini connector instead of 4-pin Mini connector |
| C2JK05-561 | C54B Form Y1851? |
|
| C2JK052 | C54N | |
| C2JK053 | C54A | |
| C2JK053-553-E | C54A Form Y1902? |
5-pin Mini connector instead of 4-pin Mini connector |
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| C2JK053WY | C54A1 Form Y203 | |
| C2JK054 | C54B | Standard operating force/torque |
| C2JK0545 | C54B | Standard operating force/torque |
| C2JK0545-520-E6 | C54B Form Y1851? |
Standard operating force/torque, 8’ cable |
| C2JK05WY | C54B1 Form Y203 | |
| C2JK05Y | C54B Form Y203 | |
| C2JK09 | C54C | |
| C2JK1 | C54E | |
| C2JK1-547 | C54E Form Y1901? |
|
| C2JK2 | C54D | |
| C2JK3 | C54G | |
| C2JK3-547 | C54G Form Y1901? |
|
| C2JK4 | C54FH | |
| C2JK5 | C54F | |
| C2JK528 | None as of Dec. 1994 | Turnstile switch |
| C2JKF05 | C54B | |
| C2JKF05-561 | C54B Form Y1851? |
|
| C2LAIR | None | Air operated switch is not available |
| C2LBJK2 | C54D Form P5 | All pilot lights are prewired |
| C2LJK01 | C54B2 Form P5 | All pilot lights are prewired |
| C2LJK05 | C54B Form P5 | All pilot lights are prewired |
| C2LJK05-547 | C54B Form P5 Y1901? |
All pilot lights are prewired |
| C2LMJK05 | C54B Form P5 Y2051 | All pilot lights are prewired |
| C2MJK013 | C54A2 Form Y2051 | |
| C2MJK05 | C54B Form Y2051 | |
| C2MJK052 | C54N Form Y2051 | |
| C2MJK053 | C54A Form Y2051 | |
| C2MJK1 | C54E Form Y2051 | |
| C2MJK2 | C54D Form Y2051 | |
| C2NW | C54J | |
| C2TJK012T | C54N2 Form Y128 | |
| C2TJK013T | C54A2 Form Y128 | |
| C2TJK015T | C54B2 Form Y128 | |
| C2TJK01T | C54B2 Form Y128 | |
| C2TJK05T | C54B Form Y128 | |
| C2TJK09T | C54C Form Y128 | |
| C2TJK1T | C54E | Low temperature is not available on plunger types |
| C2TJK2T | C54D | Low temperature is not available on plunger types |
| C2TJK4T | C54FH | Low temperature is not available on plunger types |
| C2TJK5T | C54F | Low temperature is not available on plunger types |
| C2TNWT | C54J | Low temperature is not available on wobble types |
| C2TWT | C54K | Low temperature is not available on wobble types |
| C2VJK01V | C54B2 Form Y140 | |
| C2W | C54L | |
| C2XJK06 | C54B2 Form Y1561 | |
| C2XJK06-520-6 | C54B2 Form Y1561 Y1851? |
8’ cable |
| C3AJK04 | C68T10 Form Y78 | |
| C3AVJK04V | C68T10 Form Y78 Y140 | |
| C3BJD04 | C68T10 | |
| C3BJD06 | C66B2 | |
| C3BJK04 | C68T10 | |
| C3BJK06 | C66B2 |
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| C3BJK06 | C66B2 | |
| C3BJK066 | C66B2 | Standard operating range/travel |
| C3BJK06X | C66B2 Form Y201 | |
| C3BJK16 | C66E | Standard operating range/travel |
| C3BJK26 | C66D | Standard operating range/travel |
| C3BJK36 | C66G | Standard operating range/travel |
| C3BJK46 | C66FH | Standard operating range/travel |
| C3BJK56 | C66F | Standard operating range/travel |
| C3BLJK04 | C68T10 Form P8 | 2 pilot lights, All pilot lights are prewired |
| C3BLJK06 | C66B2 Form P8 | 2 pilot lights, All pilot lights are prewired |
| C3BTJK04T | C68T10 Form Y128 | |
| C3BTJK06T | C66B2 Form Y128 | |
| C3GTJK04T | C68T10 Form Y128 | 1/2 inch conduit |
| C3J101 | C66B2 | Standard operating range/travel |
| C3JD04 | C68T10 | |
| C3JD06 | C66B2 | |
| C3JK04 | C68T10 | |
| C3JK045 | C68T10 | |
| C3JK06 | C66B2 | |
| C3JK066 | C66B2 | Standard operating range/travel |
| C3JK101 | C66B2 | Standard operating range/travel |
| C3JK36 | C66G | Standard operating range/travel |
| C3JK5838 | C66B1 | Standard operating range/travel |
| C3JK5839 | C66B | Standard operating range/travel |
| C3JK5881 | C66B2 | Standard operating range/travel |
| C3MJK04 | C68T10 Form Y2051 | |
| C3MJK06 | C66B2 Form Y2051 | |
| C3MJK2 | C66D Form Y2051 | |
| C3TJK04T | C68T10 Form Y128 | |
| C3TJK04T-P | C68T10 Form Y128 Y1842? |
5’ wires |
| C3TJK06T | C66B2 Form Y128 | |
| C3TJK5838T | C66B1 Form Y128 | Standard operating range/travel |
| C4AIR | None | Air operated switch is not available |
| C4AJK05 | C62B Form Y78 | Check possible use of reed contacts |
| C4AJK2 | C62D Form Y78 | Check possible use of reed contacts |
| C4BAIR | None | Air operated switch is not available |
| C4BAJK053 | C62A Form Y78 | Check possible use of reed contacts |
| C4BCNW | C62L | Nylon coated steel wire |
| C4BCW | C62L | |
| C4BCWB | C62L | Nylon coated steel wire with plain end |
| C4BCWB6 | C62L | Nylon coated steel wire with plain end |
| C4BDJK01 | C62B2 | Standard conduit |
| C4BHJK09 | C62C | Standard differential |
| C4BHJK528 | None as of Dec. 1994 | Turnstile switch |
| C4BJD01 | C62B2 | |
| C4BJD012 | C62N2 | |
| C4BJD013 | C62N2 | |
| C4BJD05 | C62B | |
| C4BJD052 | C62N | |
| C4BJD053 | C62A | |
| C4BJD09 | C62C | |
| C4BJD1 | C62E |
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| C4BJD2 | C62D | |
| C4BJD3 | C62G | |
| C4BJD4 | C62FH | |
| C4BJD5 | C62F | |
| C4BJK01 | C62B2 | |
| C4BJK012 | C62N2 | |
| C4BJK013 | C62A2 | |
| C4BJK01Z | C62B2 Form Y202 | |
| C4BJK05 | C62B | |
| C4BJK052 | C62N | |
| C4BJK052W | C62N1 | |
| C4BJK053 | C62A | |
| C4BJK055 | C62B | |
| C4BJK05W | C62B1 | |
| C4BJK09 | C62C | |
| C4BJK1 | C62E | |
| C4BJK2 | C62D | |
| C4BJK3 | C62G | |
| C4BJK4 | C62FH | |
| C4BJK5 | C62F | |
| C4BJK528 | None | Turnstile switch |
| C4BJK542 | B62NC2? |
|
| C4BLJK01 | C62B2 Form P5 | |
| C4BLJK05 | C62B Form P5 | |
| C4BLJK2 | C62D Form P5 | |
| C4BLW | C62K Form P5 | |
| C4BNW | C62J | |
| C4BRJK01 | C62B2 Form Y231 | |
| C4BRJK05 | C62B Form Y231 | |
| C4BRJK052 | C62N Form Y231 | |
| C4BRTJK01T | C62B2 Form Y128 Y231 | |
| C4BTJK01T | C62B2 Form Y128 | |
| C4BTJK053T | C62A Form Y128 | |
| C4BTJK1T | C62E | Low temperature is not available on plunger types |
| C4BTJK2T | C62D | Low temperature is not available on plunger types |
| C4BTJK3T | C62G | Low temperature is not available on plunger types |
| C4BTJK4T | C62FH | Low temperature is not available on plunger types |
| C4BTJK5T | C62F | Low temperature is not available on plunger types |
| C4BVJK05V | C62B Form Y140 | |
| C4BVJK1V | C62E Form Y140 | |
| C4BW | C62L | |
| C4CNW | C62L | Nylon coated steel wire |
| C4CW | C62L | |
| C4CWB | C62L | Nylon coated steel wire with plain end |
| C4GJK05 | C62B | 1/2 inch conduit |
| C4GJK2 | C62D | 1/2 inch conduit |
| C4HJK09 | C62C | Standard differential |
| C4HJK528 | None | Turnstile switch |
| C4HTJK09T | C62C Form Y128 | Standard differential |
| C4JD01 | C62B2 | |
| C4JD012 | C62N2 | |
| C4JD013 | C62N2 |
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| C4JD05 | C62B | |
| C4JD052 | C62N | |
| C4JD053 | C62A | |
| C4JD09 | C62C | |
| C4JD1 | C62E | |
| C4JD2 | C62D | |
| C4JD3 | C62G | |
| C4JD4 | C62FH | |
| C4JD5 | C62F | |
| C4JK01 | C62B2 | |
| C4JK012 | C62N2 | |
| C4JK013 | C62A2 | |
| C4JK05 | C62B | |
| C4JK05-P | C62B Y1842? |
5’ wires |
| C4JK052 | C62N | |
| C4JK052Z | C62N1 Form Y202 | |
| C4JK053 | C62A | |
| C4JK053W | C62A1 | |
| C4JK053Y | C62A Form Y203 | |
| C4JK09 | C62C | |
| C4JK1 | C62E | |
| C4JK2 | C62D | |
| C4JK3 | C62G | |
| C4JK3-P | C62G Form Y1842? |
5’ wires |
| C4JK4 | C62FH | |
| C4JK4-X0002 | C62F | Standard pretravel |
| C4JK5 | C62F | |
| C4JK528 | None as of Dec. 1994 | Turnstile switch |
| C4JK542 | B62NC2? |
|
| C4NW | C62J | |
| C4RJK01 | C62B2 Form Y231 | |
| C4TJK013T | C62A2 Form Y128 | |
| C4TJK015T | C62B2 Form Y128 | |
| C4TJK01T | C62B2 Form Y128 | |
| C4TJK053T | C62A Form Y128 | |
| C4TJK05T | C62B Form Y128 | |
| C4TJK2T | C62D | Low temperature is not available on plunger types |
| C4TJK5T | C62F | Low temperature is not available on plunger types |
| C4TLJK015T | C62B2 Form P8 Y128 | 2 pilot lights, all pilot lights are prewired |
| C4W | C62L | |
| C5842 | C54A2 | Does not have hole drilled through shaft |
| C5842-572 | C54A2 Form Y1901? |
Does not have hole drilled through shaft. 5-pin Mini connector instead of 4-pin Mini connector |
| C5842X | C54A2 Form Y201 | Does not have hole drilled through shaft |
| C5880 | None as of Dec. 1994 | Paddle operated switches |
| C5880-1 | None as of Dec. 1994 | Paddle operated switches |
| C5880-2 | None as of Dec. 1994 | Paddle operated switches |
| C5880-4 | None as of Dec. 1994 | Paddle operated switches |
| C5880-5 | None as of Dec. 1994 | Paddle operated switches |
| C5892 | C54KC | |
| CG0JK08 | None | Solid state outputs are not available |
| CGA-8044 | None | Mercury reed contacts are not available on gravity return |
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| CGAJK08 | None | Reed contacts are not available on gravity return |
| CNW | L | Nylon coated steel wire |
| CRAJK01 | C84B2 | |
| CRAJK05 | C84B | |
| CRAJK052 | C84N | |
| CRAJK053 | C84A | |
| CRAJK2 | C84D | |
| CRANW | C84J | |
| CRBJK01 | C86B2 | |
| CW | L | |
| CW-12 | L S1 | |
| CWB | L | Nylon coated steel wire with plain end |
| EW2GJK01 | CR53B2 Form Y225 | |
| EW2JK01 | CR53B2 | |
| EW2JK05 | CR53B | |
| EW4GTJK01T | CR61B2 Form Y128 Y225 | |
| EW4HSJK099 | CR61C | Standard operating force/torque |
| EX2AGJK01T | CR53B2 Form Y78 Y225 | |
| EX2AIRT | None | Air operated switch is not available |
| EX2HJK09T | CR53C | Standard operating force/torque |
| EX2JK012T | CR53N2 | |
| EX2JK013T | CR53A2 | |
| EX2JK013TZ | CR53A2 Form Y202 | |
| EX2JK01T | CR53B2 | |
| EX2JK052T | CR53N | |
| EX2JK053T | CR53A | |
| EX2JK05T | CR53B | |
| EX2JK05TW | CR53B1 | |
| EX2JK1T | CR53E | |
| EX2JK2NT | CR53D | Steel roller |
| EX2JK2T | CR53D | |
| EX2JK3T | CR53G | |
| EX2JK4NTY | CR53FH Form Y203 | Steel roller |
| EX2JK4T | CR53FH | |
| EX2JK528T | None as of Dec. 1994 | Turnstile switch |
| EX2JK5T | CR53F | |
| EX2JKAIR | None | Air operated switch is not available |
| EX2NWT | CR53J | |
| EX3JK04T | CR67T10 | |
| EX3JK06T | CR65B2 | |
| EX3JK06TY | CR65B2 Form Y203 | |
| EX3JK5838T | CR65B1 | Standard operating range/travel |
| EX3TJK04T | CR67T10 Form Y128 | |
| EX4GHJK09T | CR61C Form Y225 | |
| EX4GHSJK099T | CR61C Form Y225 | Standard operating force/torque |
| EX4GJK01T | CR61B2 Form Y225 | |
| EX4GJK05T | CR61B Form Y225 | |
| EX4GJK05TW | CR61B1 Form Y225 | |
| EX4HJK09T | CR61C | |
| EX4JK012T | CR61N2 | |
| EX4JK013T | CR61A2 | |
| EX4JK015T | CR61B2 |
| Telemecanique Part Number |
Square D Class 9007 Type Number |
Differences of 9007 C Switch |
| EX4JK01T | CR61B2 | |
| EX4JK05T | CR61B | |
| EX4JK09T | CR61C | |
| EX4JK1T | CR61E | |
| EX4JK5NT | CR61F | Steel roller |
| EX4VJK01TV | CR61B2 Form Y140 | |
| JK01 | B | |
| JK012 | N | |
| JK013 | A | |
| JK013V | A | (Viton standard on lever arm type heads) |
| JK015 | A | |
| JK01T | B Form Y128 | |
| JK04 | T10 | |
| JK045 | T10 | |
| JK04T | T10 Form Y128 | |
| JK05 | B | |
| JK052 | N | |
| JK053 | A | |
| JK0545 | B | Standard operating force/torque |
| JK055 | B | |
| JK06 | B | 2 Step is a function of the 9007 C bodies |
| JK065 | B | 2 Step is a function of the 9007 C bodies |
| JK066 | B | 2 Step is a function of the 9007 C bodies |
| JK08 | None | |
| JK09 | C | |
| JK099 | C | |
| JK09T | C Form Y128 | |
| JK1 | E | |
| JK16 | E | 2 Step is a function of the 9007 C bodies |
| JK2 | D | |
| JK26 | D | 2 Step is a function of the 9007 C bodies |
| JK2T | D | Low temperature is not available on plunger types |
| JK3 | G | |
| JK36 | G | 2 Step is a function of the 9007 C bodies |
| JK4 | FH | |
| JK46 | FH | 2 Step is a function of the 9007 C bodies |
| JK5 | F | |
| JK528 | None as of Dec. 1994 | Turnstile switch |
| JK542 | — ——– | Order complete gravity return switch |
| JK56 | F | 2 Step is a function of the 9007 C bodies |
| NW | J | |
| W | L |
| Telemecanique | Description | Square D | Differences |
| C2AJK05 | Gold contacts | Form Y78 | Suggest using reed switches |
| C2BJK05 | Plug-in format | All Type C are plug-in format | |
| C2DJK05 | Shallow conduit entrance | None- use standard device | Standard conduit depth |
| C2JK05-520E | Epoxy filled receptacle | Standard on Forms Y184_ and Y185_? |
|
| C is replaced by EX, and T added at the end i.e.: EX2JK05T | Hazardous location | Use CR…. | |
| C is replaced by EW i.e.: EW2JK05 |
NEMA 4 enclosure with hazardous location mounting dimensions | Use CR…. | |
| C2BFJK542 | Low force snap switch | None on standard devices. Use B54NC2 where possible | |
| C2BJKF05 | Modified for Ford Motor Co. (Metal cams) | Use standard devices (Metal cams Standard) |
See product data bulletin 9007PD9201 for more info |
| C2GJK05 | 3/4 inch conduit | Form Y225, available on Type CR only | 1/2 inch conduit is standard |
| C2HJK09 | High differential | None- use standard device | Standard differential |
| C2BLJK05 | Pilot light | Form P5 on single pole Form P8 on two pole |
All pilot lights are prewired |
| C2MJK05 | Manifold mounting | Form Y2051 | Location of manifold knockout |
| C2BJK2N | Nylon roller on plunger heads | None- use standard device | Steel roller |
| C2JK05P | Pre-wired and potted, 6′ wires | Form Y1841 – singe pole? Form Y1842 – double pole? |
5′ wires |
| C2BRJK05 | Back tapped mounting- 1/4-20 | Form Y231 | |
| 2 is replaced by RA. i.e.: CRAJK05 | Reed contacts, NO | C84…. | |
| 2 is replaced by RB. i.e.: CRBJK05 | Reed contacts, NC | C86…. | |
| C2TJK05T | Low temperature | Form Y128 (lever types only) | |
| C2VJK05V | Viton seals | Form Y140 | |
| C2JK05W | CCW operation | Change 2 to 1. i.e.: C54B2 changes to C54B1 |
|
| C2JK05X | Rotating the Head | Form Y201 | |
| C2JK05Y | Rotating the Head | Form Y203 | |
| C2JK05Z | Rotating the Head | Form Y202 | |
| C2JK054 | Heavy return springs | None- use standard device | Standard operating forces |
| C2JK055 | Mechanical stop | Standard on all lever heads | |
| C3JK066 | Extended range- 2 stage switches | None- use standard device or consult product management | Standard pretravel |
| C2BJK05-519 | 4-pin connector | Form Y1901? |
5-pin Mini instead of 4-pin connector. Telemecanique connector was much larger in dia. |
| C2JK05-520 | Pre-wired and sealed, 3′ cable | Form Y1851? |
Epoxy potted, 8′ cable |
| C2JK05-520-6 | Pre-wired and sealed, 6′ cable | Form Y1851? |
Epoxy potted, 8′ cable |
| C2JK05-520-18 | Pre-wired and sealed, 18′ cable | Form Y185118? |
Epoxy potted |
| C2JK05-521 | Pre-wired, 3′ cable | Form Y1851? |
Epoxy potted, 8′ cable |
| C2JK05-521-6 | Pre-wired, 6′ cable | Form Y1851? |
Epoxy potted, 8′ cable |
| C2JK05-521-18 | Pre-wired, 18′ cable | Form Y185118? |
Epoxy potted |
| C2JK05-546 | 4-pin Mini connector | Form Y1901? |
5-pin instead of 4-pin |
| C2JK05-547 | 5-pin Mini connector | Form Y1901? |
|
| C2JK05-551 | Pre-wired and potted, 3′ cable | Form Y1851? |
8′ cable |
| C2JK05-553 | 4-pin Mini connector | Form Y1901? |
5-pin Mini instead of 4-pin |
| CRAJK05-559 | 3-pin Mini connector | Form Y1911? |
|
| C2BJK05-561 | Pre-wired and potted, 8′ cable | Form Y1851? |
|
| C2BJK05-561-18 | Pre-wired and potted, 18′ | Form Y185118? |
|
| CRAJK05-563 | 3-pin Mini connector, 90°angled |
None | Not set up |
| C4JK05-564 | 9-pin Mini connector | Y19016 | |
| C2JK05-5902 | Adaptor plate for Type L | Form Y147 | Available as 9007 BT1 kit |
| C2BJK05-5902B | Adaptor plate for Type L | Form Y147 | Available as 9007 BT1 kit |
| Lever Arm Types |
Standard Travel |
Telemecanique | 11° |
8° |
20° |
28° |
5° |
3.125 lb-in |
| Square D | 10° |
10° |
2.5° |
N/A | 4° |
4 lb-in | ||
| Short Travel | Telemecanique | 7° |
3° |
3.125 lb-in | ||||
| Square D | 5° |
2° |
4 lb-in | |||||
| Low Torque | Telemecanique | 11° |
5° |
25 oz-in | ||||
| Square D | 10° |
4° |
25 oz-in | |||||
| Neutral Position |
Telemecanique | 11° |
5° |
3.75 lb-in | ||||
| Square D | 10° |
4° |
4 lb-in | |||||
| Maintained Contact |
Telemecanique | 50° |
—– | 2.2 lb-in | ||||
| Square D | 45° |
—– | 3 lb-in | |||||
| Plunger Types |
Top Plungers | Telemecanique | .06″ | .036″ | .070″ | .02″ | 2.2 lb† |
|
| Square D | .08″ | .080″ | .090″ | .02″ | 3 lb | |||
| Side Plungers | Telemecanique | .09″ | .078″ | .114″ | .03″ | 4.88 lb† |
||
| Square D | .08″ | .080″ | .020″ | .03″ | 4 lb | |||
| Wobble and Cat Whisker Types | Wobble Stick | Telemecanique | 16° |
5° |
9 oz-in | |||
| Square D | 10° |
3° |
3 lb-in | |||||
| Cat Whisker | Telemecanique | 13° |
5° |
6 oz-in | ||||
| Square D | 20° |
6° |
7 oz-in | |||||
| † Telemecanique 2-stage plunger devices have an operating force of 6.875 lbs. Shaded areas indicate devices not available in the Telemecanique Type C. | ||||||||
| Dimension | Standard Box | Hazardous Location | ||
| Telemecanique | Square D | Telemecanique | Square D | |
| Overall dimensions, lever types: Height Width Depth |
4.230″ 1.619″ 1.750″ |
4.020″ 1.550″ 1.790″ |
6.180″ 2.310″ 2.060″ |
6.100″ 2.720″ 2.080″ |
| Distance from upper mounting holes to: Center of shaft on lever types End of plunger on top straight plunger types End of plunger on top roller plunger types Center of shaft on side plunger types |
0.915″ 1.966″ 2.286″ 0.832″ |
0.750″ 1.720″ 2.190″ 0.750″ |
1.125″ 2.176″ 2.496″ 1.042″ |
1.190″ 2.160″ 2.630″ 1.190″ |
| Distance from mounting surface to: End of shaft on lever types End of plunger on side straight plunger types End of plunger on side roller plunger types Center of wobble stick and cat whisker |
2.516″ 2.115″ 2.592″ 0.768″ |
2.500″ 2.190″ 2.660″ 0.780″ |
2.680″ 2.277″ 2.754″ 0.930″ |
2.790″ 2.480″ 2.950″ 1.070″ |